KitGuru Reviews Sihoo B300 Pro: High Adjustability Offset by Ergonomic Flaws
Technology news
KitGuru reviewed the ~£250 Sihoo B300 Pro ergonomic office chair, finding generous adjustments and breathable mesh, but noting aggressive lumbar curvature and mechanical rattles.
Key Evaluation and Main Findings by KitGuru
According to a review by Carlos Ribeiro on KitGuru, the Sihoo B300 Pro ergonomic office chair, retailing at approximately £250, earned a rating of 7 out of 10. The reviewer noted that while the chair appears to be an exceptional value proposition on paper—boasting adjustments typically found on models twice its price—it proved in practice to be one of the most ill-fitting chairs tested. Tested strengths include an exceptionally breathable high-elastic mesh construction that prevents heat buildup, a self-calibrating weight-sensing recline mechanism that removes the need for manual tension adjustment, and 3D flip-up armrests capable of 360-degree rotation.
Specifications and Identified Ergonomic Issues
The tested configuration featured a white frame with light gray mesh, a 5cm height-adjustable backrest, a lumbar support with 5cm vertical height and manual depth knob adjustments, a seat with height adjustment and a 5cm depth extension slider, and a removable dual-angle tilt headrest. During testing, the reviewer (1.75m tall, under 70kg) reported that the lumbar support pushed the lower spine excessively forward, preventing the upper back from touching the backrest and upright head contact with the headrest. Furthermore, the minimum seat depth was too long, causing the unpadded hard plastic front edge to press against the back of the knees.
Scope of Suitability and Practical Application
Based on KitGuru's evaluation, the chair may potentially suit taller individuals who require a deeper seating base and prefer aggressive forward lumbar support. However, for users of average proportions similar to the tester, the posture proved awkward. Practical limitations also emerged in desk integration: the armrests sat too high to slide beneath the tester's standard desk for gaming setups. Assembly conducted solo took approximately 44 minutes, slowed down by confusing instructions and excessive single-use plastic wrap packaging.
Build Quality Limitations and Mechanical Caveats
KitGuru identified several build-tolerance issues during testing. The internal seat depth slider mechanism produced a noticeable rattle whenever the user shifted weight. The lumbar support slipped out of its vertical adjustment when lightly brushed against upon standing, and its two highest settings exposed hard plastic that dug directly into the back. The headrest swivel mechanism was excessively stiff, emitting sounds akin to cracking plastic when adjusted, and applying downward pressure to the armrests caused the entire backrest assembly to flex forward, inducing a sensation of sliding off the seat.
Source: kitguru.net (https://www.kitguru.net/tech-news/featured-tech-reviews/carlosribeiro/sihoo-b300-pro-review/)